D Link Dwr 921 Lte Router

4G LTE ROUTER
DWR-M921

QUICK INSTALLATION GUIDE

CONTENTS OF PACKAGING

CONTENTS

Product SETUP

HARDWARE SETUP

Ensure that your DWR-M921 Mobile Router is powered off before performing the steps below.

1. Flip the router around and open the lid at the bottom of the router.
2. Gently press down and slide the silverish SIM cardholder to the correct ( OPEN ) & open the flap.
3. Insert a standard USIM card into the SIM carte du jour holder with the gilded contacts facing downwards.
4. Shut the flap and slide the SIM card holder back to the left ( LOCK) to lock information technology. Close the lid.
5. Insert the Ethernet cablevision into the LAN Port 1 on the back panel of the DWR-M921 Mobile Router, and the other end into an Ethernet port on a estimator to configure the unit.
6. Connect the power adapter to the socket on the back panel of your DWR-M921 Mobile Router and plug the other end of the power adapter into a wall outlet or power strip.
   a. Turn ON the router. The Power LED will lite upward to indicate that power is being supplied to the router.
   b. Afterward a few moments, if a connectedness has been established, the post-obit LEDs will turn solid bluish: Power, LAN 1-iv (depending on which port your Ethernet cable has been continued to), Wi-Fi, LTE, and WAN (if the connection is used).
   c. The initialization process takes about 45 seconds to a minute.
   Note: The 4G connection can also be used every bit a backup WAN. Once a backup is configured.
   Note:  The DWR-M921 Mobile Router LAN Ports are "Motorcar-MDI/MDIX." Therefore, patch or crossover Ethernet cables can be used.

Advanced SETUP (ACCESS VIA IP ADDRESS)
Open up a browser window and enter the below IP address into the browser accost field.
Log in using the username and password below.

TROUBLESHOOTING

SETUP AND CONFIGURATION Issues

1. HOW DO I CONFIGURE MY DWR-M921 ROUTER OR Check MY WIRELESS NETWORK Proper name (SSID) AND WIRELESS PASSWORD (WPA KEY)?
   – Connect your PC to the router using an Ethernet cablevision.
   – Open up a web browser and enter the router'south IP accost: http://192.168.0.one
   – Log in to the router using the default username admin, the default password is admin.
   – One time logged in, yous can configure your router through the GUI.
   Annotation: If you lot have changed the password and cannot remember it, you will need to reset the router to factory defaults.
2. HOW DO I RESET MY DWR-M921 ROUTER TO FACTORY DEFAULT SETTINGS?
   – Ensure the router is powered on. If you cannot remember your router administrator password, yous may printing and agree the reset push on the side of the router for about 10 seconds.
   Note: Resetting the router to factory default will erase the electric current configuration. Log in as outlined in question ane and reconfigure your router through the GUI.
3. HOW DO I Add A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY WIRELESS NETWORK NAME (SSID) OR WIRELESS PASSWORD (WPA KEY)?
   – Every PC that needs to connect to the router wirelessly, you will demand to ensure you use the correct Wireless Network Proper noun (SSID) and Wireless Password (WPA key).
   – Apply the web-based user interface (every bit described in question 1 to a higher place) to check or choose your wireless settings.
   – Brand certain you lot write downward these settings and then that you tin can enter them into each wirelessly connected PC.
4. WHY AM I UNABLE TO Constitute AN INTERNET CONNECTION?
   – If connecting using a 4G mobile connection, make sure that you are within the network coverage of your SIM carte provider, and that the service has been correctly configured.
   – If connecting using the WAN via ADSL/Fibre service, brand sure the modem has been enabled/continued and is operational, and that the service is correctly configured.

TECHNICAL SUPPORT

You can discover software updates and user documentation ao the D-Link website.
Tech Support for customers in

D-Link Eye E – Dubai, U.A.East.
Technical Support: +971-four-8809033
General Inquiries: [email protected]
Tech Support: [email protected]

Egypt
Technical Back up Phone call Heart: +20 2258 66777
Full general Inquiries: [email protected]
Tech Back up: [email protected]

Kingdom of Kingdom of saudi arabia
Technical Support: +966 1121 70009
General Inquiries: [email protected]
Tech Support: [electronic mail protected]

Pakistan
Technical Support: +92-21-34548310, 34305069
General Inquiries: [email protected]
Tech Back up: [email protected]

Morocco
Telephone function: +212 700 xiii fourteen 15
Email: [electronic mail protected]

Bahrain
Technical Support: +973 one 3332904

Kuwait
Electronic mail: [email protected]

South Africa
Technical Support: +27-08600-35465, 012 741 2000
Tech Support: [email protected]

FCC WARNING: This equipment may generate or use radiofrequency energy. Changes or modifications to this equipment may crusade harmful interference unless the modifications are expressly canonical in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized modify or modification is made.

This device complies with part 15 of the FCC Rules. Operation is discipline to the post-obit 2 conditions: (i) This device may non cause harmful interference, and (ii) this device must take whatever interference received, including interference that may cause undesired functioning.

This equipment complies with RF radiation exposure limits set along for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and tin can radiate radio frequency free energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to attempt to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increment the separation between the equipment and receiver.
• Connect the equipment into an outlet on a excursion different from that to which the receiver is continued.
• Consult the dealer or an experienced radio/Television set technician for help.
• The rating data is located at the bottom of the unit of measurement.

Documents / Resources

Source: https://manuals.plus/d-link/dwr-m921-4g-n300-lte-router-manual

Posted by: gilmoretooffer55.blogspot.com

Share this post